Adaptronic Modular ECU eMod013 for S1 RX-8 (03-08)

£1,459.00 (inc VAT)

This product is one of Adaptonic’s plug-in ECU and is a direct standalone plug and play ECU for the Series 1 Mazda RX8.
The Adaptronic RX-8 Modular ECU is the replacement for the older Plug-In Select ECU.
This unit will not fit the later RX-8 R3 (2008-2013) for further details please check “Additional Information”

Out of stock

Description

Our main objective in creating the Adaptronic Modular ECU line is to work towards Adaptronic’s mission which is to give people control. In doing this, we came up with a system which would give people greater flexibility and at the same time, overcome the limitations of our main product line, the Select ECU.

GENERAL FEATURES

    • Modular system, so that people can buy hardware upgrades later as their needs develop (eg additional inputs, outputs, or specific functions, eg drive by wire or built-in lambda)
    • Built-in Oscilloscope; to aid in external hardware & wiring faults etc
    • Built in Simulator to test ecu logic & input/outputs without engine running
    • Wireless communication
    • Maximum output of 22 (8 ignition, 8 injector, 4 auxiliary, tacho and fuel pump)
    • Full Sequential Fuel & Ignition Control- Direct fire capable( 4 individual coils on a 2 rotor, up to 8 total-will run a 20B, 4 Rotor, 4/6/8 cylinder properly), and Individual Rotor/Cylinder Injector Trim( individual control up to 8 injectors)
    • 3 axis accelerometer (G sensor) and rate gyro
    • OMP, OEM DBW Throttle Body & Stock Fan Control
    • Traction & Launch Control configuration( Traction control requires traction control module upgrade at additional cost)
    • Fast USB communication, requiring no drivers
    • Headphone port for listening to the knock sensor while tuning
    • 32MB of onboard logging to flash
    • Tested to MIL-STD-202G, a military vibration standard, which varies the frequency and peaks at 7.5g of oscillating acceleration

 

Please take note that the first version of the ECU will NOT support the following:

  • Front O2 sensor control
  • Cruise control
  • Traction control (DSC)

Cruise and traction control will later be supported through a firmware update on the first version units. But the front O2 sensor will only be supported on the later versions of the ECU (requires additional circuitry).

Additional information

Compatibility

This Adaptronic eMod013 Modular ECU will only work on Series 1 2003-2008 RX-8, Due to the change in ECU type from 2008 onwards (found in the R3 Model) this unit will not work.
For 2008-2012 Models you will require a e440d (Select ECU) nor an M1200 (Modular ECU)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…