Essex Rotary can now offer a lineup of the popular Injector Dynamics fuel Injectors, these injectors are a true motorsport grade fuel injector not a production road car injector that has been modified to flow more fuel. Injector Dynamics Fuel Injectors are unique to Injector Dynamics and Manufactured to ID’s specifications for Injector Dynamics by Bosch Motorsport.
These injectors cannot be found from another manufacturer. With injectors ranging from their new ID1050x (1065cc/min at 3bar) all the way up to their ID2000 (2000cc/min Injectors) your sure to find your fuel system needs are covered by an Injector Dynamics product.
These 1700x Injectors should provide your Rotary engine with all the fuel in needs for extreme high horse power FI applications, The ID1700x injectors could be considered the modern day replacement for the old school big daddy of fuel injectors from back in the day the Bosch 1680’s that have long been out of production.
These ID1700x Injectors are for use in the secondary fuel rail only.
- Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels.
- Compact body allows fitment in 200+ applications, including current and future engines utilising short body injectors.
- Improved internal flow path increases output by 5% without sacrificing low flow performance.
- Stronger magnetic circuit offers stable operation up to 10 bar.
- Replaceable inlet filter extends service life.
The ID1700x was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.
The ID1700x will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2000, should not be expected to do so on gasoline.
If you need flawless drivability on gasoline, the ID1300x will provide this, and is capable of approximately 150hp per injector on E85.
ID1700x Basic Specifications
Nominal Flow Rate – 1725cc/min @ 3.0 Bar (43.5 psi) Using Iso-Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 7.0 Bar (101.5 psi)
Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels.
Electrical Connector – USCAR
Each set of injectors are specifically selected and set up for the selected vehicles application.
This Set will fit all years of Mazda RX-8, though you will require 2 sets (4 injectors in total) for use with the 231ps 6 port RX-8 built between 2003-2008 (series 1)
This Kit Contains :
2 x ID1700x Fuel Injectors (designed to fit the stock RX-8 Secondary Fuel Rail with 11mm top seals)