Description
Protect your turbo from oil based failures due to over pressurizing the CHRA/Core.
Most rotary engine run oil pressure over and above the recommended oil pressures for most modern ball bearing turbo’s between 80 – 110 psi compares the the recommended pressure for the turbo of around 40 – 45 psi.
Turbosmart’s Patent Pending OPRt40 is an Oil Pressure Regulator designed for your Turbocharger.
Many Turbochargers are built around a bearing and oil pressure profile much lower than is seen by modern & hi-performance, engines and feeding these turbochargers the appropriate amount of oil pressure has always been a challenge. Traditional methods to limit oil pressure have been with a restrictor, aimed at reducing pressure – However this also reduces flow.
Turbosmart’s OPRt40 is a true regulator in that target oil pressure oil 40psi can be achieved without compromising oil flow. This takes the guess work out of restrictor, or feed and drain hose selection and ensure the oil going to the turbocharger, never exceeds the manufacturers tolerances – This will provide you rock solid oil supply pressure, within the manufactures tolerances.
Available in
- Black
- Blue
Features
- Fixed 40psi Configuration
- 1/8” NPT Gauge/Sensor Port
- -4 AN Return Port to Engine Oil Sump
- -4 AN ORB Outlet Port to Turbo CHRA
- -4 AN ORB Inlet Port from Engine Oil Feed
-4 AN ORB fittings are not included with the kit and will need to be purchased separately.
Not sure this is right for you? Check out our video on ‘Why you need a Turbosmart OPRt40‘
Reviews
There are no reviews yet.