MSD Ignition 6AL Ignition Control Unit With Rev Limiter

Description

A popular ignition upgrade choice for old school rotary owners this is the MSD Digital 6AL Ignition Control unit including Rev Limiter.

For 4, 6, 8-Cylinders Universal and Rotaries

• Advance with the digital power of your popular favorite MSD 6AL ignitions. With less power draw and higher output, MSD moves you with “the fire to drive” in a digital powerhouse! Inside microprocessors, updated circuits and efficient components monitor and handle every firing and rev limit to produce more power while pulling less current. Don’t worry; features that made their 6AL boxes your first choice remain but with improved output–more than135mJ of spark energy for every firing with 530+ volts to the coil! And, to go with the new power, a new look. These digital 6AL ignition controllers are sleek with a lower profile. Wiring is routed out one end through a sealed and locked connector and two rotary dials to set rpm limit are positioned right on top–easier installation, super easy access and a clean, neat appearance under the hood. Controllers are supplied with wiring harness and components you need for install plus, vibration mounts. Increased output and proven multiple-spark power MSD digital 6AL ignition controllers are a definite win-win!The MSD 6AL Ignition Control is the standard that other ignitions try to match. There are even ignitions made by other companies that use the 6AL name (and sometimes the same part number). MSD advanced the standard even more with the introduction of the revised Digital 6AL Ignition Control. All the wiring on the Digital 6AL and 6A runs through one end of the unit, passing through a sealed, locking connector. This simplifies installation and makes sure the wiring stays organized and clean. The rev limiter on the 6AL is placed on top of the housing for quick access to the two rotary dials for setting the limit in increments of 100 RPM. Inside the Digital 6AL there is a microprocessor for monitoring and controlling each firing and for the rev limit. The circuits have been updated with more efficient components to aid the ignition in producing more power on less current! The Digital 6AL and 6A each deliver more than 530 volts to the coil, providing up to 135mJ of spark energy for each firing. Greater output with MSD’s race-proven multiple spark series is a terrific combination! The Digital 6A and 6AL come with the wiring harness and components that are needed for installation. The 6AL also has with vibration mounts. Both ignitions can be used on 4-, 6- or 8-cylinder engines with 12-volt, negative-ground electric systems. These ignitions will take trigger inputs from magnetic pickups, breaker points and amplifiers.
  • With soft touch rev control
  • Higher output with 530 primary volts and 135mj of spark energy
  • Efficient components use less current to produce more power
  • Set an RPM limit on the 6AL with two rotary dials
  • Same bolt pattern as the original 6AL with a lower profile housing
  • Built-in LED for system checks
  • All wires exit the same side through a locked, sealed connector
  • Compatible for 4, 6 or 8-cylinder engines

This is not a plug and play item and will require some custom some wiring depending on your setup.