Competition Clutch Sprung Stage 4 Clutch Kit for RX-7 FD3s

Description

Stage 4 – Spring “Strip” Series 1620 Clutch Kit is Good for up to 750hp

This assembly, available with a six puck sprung plate is good for penetrating engagement with higher horsepower applications. This disc complimented by a performance pressure plate provides up to 250% increase in torque capacity.

300-mile break-in recommended with this set-up.

The 1620 Series kit includes a performance pressure plate, a six-puck high torque sprung disc with Ceramic buttons, all applicable bearings, and the appropriate alignment tool.

A popular option with drifters and those running big power.

Each Competition Clutch Kit includes the following:

• Clutch Pressure Plate
• Clutch Disk(s)/friction plate(s)
• Competition Clutch High Quality Release Bearing (SEE NOTE BELOW ABOUT RELEASE BEARING)
• A Free Clutch Alignment Tool.

Essex Rotary would recommend changing your pilot bearing and seal out at the same time as doing your clutch, this is an inexpensive part however its often overlooked when doing the job. the Pilot bearing and seal can be purchased here

Please note that the image is not of the actual clutch, you will be getting the correct Pull style clutch kit for your standard FD setup. If you are running a pull to push converter then please get in contact for clutch options as the standard setups will not work.

IMPORTANT NOTE ABOUT COMPETITION CLUTCH RELEASE BEARING
It has come to our attention that competition clutch have been shipping the incorrect release bearing for the RX-7 FDm while it looks correct its design means it will not work on the FD’s clutch release fork. We are unable to get these supplied with the correct bearing and Competition Clutch will not supply the kits without the release bearing. As a result please note that we would recommend you purchasing the correct release bearing from the shop separately should you require a new one.
We will be checking kits as they arrive and if we find the correct bearing in the kits we will be happy offer a refund or an exchange for the value of the release bearing.
We are sorry for this inconvenience however we have had to make this issue public due to issues we have found and do not with to cause inconvenience to our customers.
This is an issue across the competition clutch RX-7 FD supply chain and not specific to Essex Rotary Only however we are the only ones to out knowledge to know of the issue and let customers know.

If this issue is resolved then we will remove this notice.