Suspension Arm to Subframe Bolt for RX-8

Description

With the increasing number of customers overhauling their running gear on their RX-8 due age, we have found the call for the suspension hardware to be replaced on an increasing regularity. For this reason we are now offering this hardware for use when doing suspension work. This bolt is found in nearly all locations on the subframe where the adjustment bolts are not used. some locations will require a nut while others have the nut welded to the subframe (so the nut cannot be replaced easily. These locations are: Front Subframe

• Front Upper Control Arm (2 per side) no nuts required
• Front Lower Control Arm to Front Shock Absorber (1 per side) – nut required

Rear Subframe

• Rear Upper Trailing Link to Subframe – Nut Required
• Rear Lower Trailing Link to Subframe – Nut Required
• Rear Upper Trailing Link to Wheel Bub – No Nut Required
• Rear Upper Lateral Link to Subframe – Nut Required

Full Kit  We have also compiled a full kit for your ordering convenience consisting or all 14 bolt and 8 Nuts sets. this will replace all the above mentioned nuts and bolts on your RX-8 front and rear subframe. This Kit is priced at a discounted rate including a combined shipping discount to boot. Please note that the full kit is only the regular non adjustable Nuts and Bolts and does not contain the adjustable alignment and bolts required for the rest of the suspension arms.  Each individual set will replace one bolt location on the vehicle depending on your selection, if you wish to replace them all then we would recommend you select the full kit option from the dropdown selection box.